OPTISONIC 6300

Ultrasonic clamp-on flowmeter for flow measurement of liquids

  • Stationary device, for installation at any location without process interruption or need to cut pipes
  • Up to +200°C / +392°F
  • Robust stainless steel sensor rail for pipes DN15…4000 / ½…160"
  • 4…20 mA, HART®7, Modbus

OPTISONIC 6300 F – Version with medium sensor rail (X-mode) and field-mounted signal converter

OPTISONIC 6300 – Version with medium sensor rail and UFC 300 F signal converter

The OPTISONIC 6300 is an ultrasonic clamp-on flowmeter for permanent mount installation. It is particularly suitable for flow measurement of (non-)conductive liquids at any location where inline measurement is not possible or desirable. The flowmeter consists of a stainless steel sensor rail with two integrated transducers or for large pipe sizes of a sensor rail set with two rails and integrated transducers in each rail. Any version comes with a wall-mounted or field mounted ultrasonic signal converter. Its robust clamp-on rail is highly flexible and can be very easily attached to virtually any pipe up to DN4000 / 160".

Typical applications of the clamp-on flowmeter include flow measurement of a broad range of refined hydrocarbons, demineralised water or chemicals as well as measurements in hygienic applications. A clamp-on version for extended temperature ranges up to +200°C / +392°F is also available. The OPTISONIC 6300 has approvals for use in hazardous areas and offers HART® and Modbus communication capabilities.

Product highlights

  • Robust industrial design to provide maximum reliability
  • Easy and accurate sensor mounting using a stainless steel rail system
  • Minimal maintenance using efficient re-greasing concept or solid coupling pads
  • Optimal accuracy due to factory flow calibration
  • X-mode dual path sensor for extra reliability
  • Measurement range: 0,1...20 m/s (200:1)
  • Integrated thermal energy calculation
  • Extended temperature (XT) version available for all sensor rail sizes to measure liquids up to +200ºC / +392ºF
  • IP68 / Nema 6P option
  • Namur NE107 diagnostics
  • With wall-mounted or field-mounted converter

Typical applications

General

  • Utilities like demineralized and deionized water in all industries
  • Sanitary flow rate measurement
  • Cooling water circuits
  • Process control

Water industry

  • Potable water

Power industry

  • Water intake
  • Heated water
  • Purified water

Oil and gas industry

  • Oil transportation
  • On-loading and off-loading
  • Tank storage applications
  • Natural gas dehydration / glycol circuit
  • Leak detection
  • Water draining from storage tanks

Chemical and petrochemical industries

  • Chemical or petrochemical feedstock
  • Refined liquid hydrocarbons
  • Retrofit or replacement of inline meters
  • Chemical addition
  • Corrosive, toxic and abrasive chemicals

Product variants

OPTISONIC 6300 - Version with small sensor rail and UFC 300 F signal converter

OPTISONIC 6300 F
Small sensor version

Ultrasonic clamp-on flowmeter for small pipe diameters

  • Single or dual path measurement with 1 or 2 stainless steel 316L rails for pipes DN15...100 / ½...4″
  • Optional XT sensor version for liquids with extended temperatures up to +200ºC / +392ºF
  • Field-mounted converter with stainless steel or aluminium housing
  • Ex approvals (sensor and converter); IP68 /NEMA6P (sensor)
OPTISONIC 6300 small sensor rail z-mode ufc 300 w

OPTISONIC 6300 W
Small sensor version

Ultrasonic clamp-on flowmeter for small pipe diameters

  • Single or dual path measurement with 1 or 2 stainless steel 316L rails for pipes DN15...100 / ½...4″
  • Optional XT sensor version for extended process temperatures up to +200ºC / +392ºF
  • Wall-mounted converter with polyamide-polycarbonate housing
  • Ex approvals and IP68 /NEMA6P (sensor)
OPTISONIC 6300 – Version with medium sensor rail and UFC 300 F signal converter

OPTISONIC 6300 F
Medium sensor version

Ultrasonic clamp-on flowmeter for medium pipe diameters

  • Single or dual path measurement with 1 or 2 stainless steel 316L rails for pipes DN50...400 / 2...16″; extended diameters up to DN1250 / 50” with X-mode version
  • Optional XT sensor version for extended process temperatures up to +200ºC / +392ºF
  • Field-mounted converter with stainless steel or aluminium housing
  • Ex approvals (sensor and converter); IP68 /NEMA6P (sensor)
OPTISONIC 6300 W - Version with medium sensor rail (z-mode) and UFC 300 W signal converter

OPTISONIC 6300 W
Medium sensor version

Ultrasonic clamp-on flowmeter for medium pipe diameters

  • Single or dual path measurement with 1 or 2 stainless steel 316L rails for pipes DN50...400 / 2...16″; extended diameters up to DN1250 / 50” with X-mode version
  • Optional XT sensor version for extended process temperatures up to +200ºC / +392ºF
  • Wall-mounted converter with polyamide-polycarbonate housing
  • Ex approvals and IP68 /NEMA6P (sensor)
OPTISONIC 6300 - Version with large sensor rail and UFC 300 F signal converter

OPTISONIC 6300 F
Large sensor version

Ultrasonic clamp-on flowmeter for large pipe diameters

  • Single or dual path measurement with 2 stainless steel 316L rails for pipes DN200...4000 / 8...160″
  • Optional XT sensor version for extended process temperatures up to +200ºC / +392ºF
  • Field-mounted converter with stainless steel or aluminium housing
  • Ex approvals (sensor and converter); IP68 /NEMA6P (sensor)
OPTISONIC 6300 - Version with large sensor rail and UFC 300 W signal converter

OPTISONIC 6300 W
Large sensor version

Ultrasonic clamp-on flowmeter for large pipe diameters

  • Single or dual path measurement with 2 stainless steel 316L rails for pipes DN200...4000 / 8...160″
  • Optional XT sensor version for extended process temperatures up to +200ºC / +392ºF
  • Wall-mounted converter with polyamide-polycarbonate housing
  • Ex approvals and IP68 /NEMA6P (sensor)

Applications

Links